WIRE ROUND END RING
Wire ring encased in fabric interlocks one duct to another. Our standard end finish.
Folded fabric forms a 4″ (102mm) finished cuff.
SOFT CUFF WITH STRAP (CLIP BUCKLE)
Smaller diameters use a 1″ (25mm) steel clip buckle.
SOFT CUFF WITH STRAP (CAM BUCKLE)
Larger diameters use a 1″ (25mm) cam buckle.
Duct is cut without encasing or finishing, the wire is not concealed.
2″ (51mm) of fabric extends past the wire and wearstrip.
WORM GEAR CLAMP
Stainless steel worm gear clamp encased in our soft cuff.
Attached at the outlet end for storage and transport.
Quick-release spring loaded over-center clamp on the inlet end and a stainless steel collar on outlet end.
A two pin black metal quick-connect coupling. Metal collar is riveted to duct ends.
Three-pin stainless steel quick-connect coupling. Metal collar is riveted or attached with a worm gear clamp.
Layflat sewn assembly splits one length of duct into two.
Straight Wye – Inlet is the same size as outlets.
Transition Wye – Tapers to smaller or larger diameter.
A flexible coupling designed for use over wire round end rings. Incorporates a heavy duty 1″ (25mm) ratchet assembly, wire cabling and hook mechanism.
RATCHET FAN STRAP
A 1″ (25mm) nylon webbing strap with attached ratchet assembly mechanism.
HOOK & LOOP (V2)
6″ (152mm) wide loop material on the air-inlet end and 6″ wide hook material on the air-outlet end.
Coil style zipper coupling protected with a fabric guard that fastens with hook & loop.
A reducing transition typically attached to the outlet end.
STRAIGHT LAYFLAT TAPER DOWN
A straight insulated layflat transition from nominal duct size down to 8″ (203mm) diameter. Product incorporates a hook & loop or zipper air-inlet end and a soft cuff on the air-outlet (8″dia) end.
STRAIGHT LAYFLAT TAPER DOWN – WITH WEARSTRIP
A straight insulated layflat transition with external wearstrip from nominal duct size down to 8″ (203mm) diameter. Product incorporates a hook & loop or zipper air-inlet end and a soft cuff on the air-outlet (8″dia) end.